Industrial Gas equipment

Sparki is a new hands free ignitor for quickly and safely lighting your torch or burner.

There is a choice of a 30mm or 50mm magnetic base to fit in your pocket or stick to the bench or job, as well as a 100mm nonmagnetic steel base to weld to a bench.

Attach it close to where you are working so you don’t have to waste valuable time looking for a conventional flint lighter.

• Flashback arrestors must be fitted to both oxygen and fuel gas lines at regulator and torch end of all oxysets.
• The two best brands of flashback arrestors currently available in Australia/World are Ibeda and Cigweld (Witt).
• We such a huge range available, we have the right flashback arrestor for just about any application 
• All of the flashback arrestors that we sell, fully meet the applicable Australian and International standards.
• All Ibeda and Cigweld (Witt) branded products are approved for annual testing on our flashback arrestor testing machine.

• We have the complete range of Ibeda quick-action couplers for inert gases as well as oxygen and fuel gases with and without flashback arrestors.
• Quick-action couplers are available for both regulator and torch end.

• We can offer single stage, and dual stage regulators in both bottom and side entry with various outlet pressures.
• With such a large range of regulators available to us, we can supply regulators for most common industrial gas applications, as well as for new and interesting applications.
• For welding applications we have an extensive range of set pressure and flow gauge regulators in numerous configurations in both bottom and side entry.
• We can supply regulators for most applications including Laser, Plasma, Profile cutting, HVAC as well as for a multitude of other applications. 

• We have flow meters for set pressure regulators in 0-25 l/m and 0-40 l/m. 
• Flow restrictors are used with set pressure regulators and give a fixed flow rate eliminating the ability of the welders to adjust the flow.
• They are available in 8 l/m, 15 l/m, 20 l/m. 

We have standard 5mm id hose for Acetylene/Oxygen and LPG/Oxygen in 5m, 10m, 15m and 20m lengths, including 100m bulk rolls if required.

For high flow applications we have 10mm id twin hose in 10m and 15m lengths.

For single hose we have 3m lengths with fittings for inert welding gases as well as 50m bulk rolls.

Tesuco, Cigweld, Harris, and Weldtronic branded industrial gas products are available depending on your preference, so you have lots to choose from.

We have blowpipes, cutting attachments, mixers, heating barrels, cutting, welding, gouging, brazing and heating tips and nozzles.

We have one piece cutting torches in 600mm, 1,000mm and 2,000mm lengths for both LPG/Oxygen and Acetylene/Oxygen. 

Kits are often the best option if your old set is no longer serviceable as they give you everything you need to safely use your oxyset.

They comprise of regulators, hoses, full set of four flashback arrestors, blowpipe, cutting attachment, welding or brazing tips, cutting tips, flint lighter, tip cleaners.

There are kits available for both Acetylene/Oxygen & LPG/Oxygen from Tesuco, Cigweld, Harris and Weldtronic.

We have a wide selection of roller guides, radius bars, flint lighters, spare flints, hose connections, fittings, “O” rings, etc.

There is an extensive range of LPG/Air equipment available, a multitude of different burners, neck tubes, hoses, and many other componenets.

All gas equipment should be leak tested on a regular basis to ensure there are no potentially dangerous or costly leaks.

The use of soapy water solutions with some gases such as oxygen could lead to a fire or explosion as the soapy solution may contain hydrocarbons.

For that reason it is vitally important that the leak detection fluid you use is safe for use with industrial and scientific gases and gas equipment.

Gas Control is an advanced gas leak detection spray, specifically designed to find gas leaks in any type of gas equipment. 

It contains a special formulation to inhibit corrosion when used on copper, brass and steel. 

When applied the slightest leak will produce foam and bubbles indicating if the equipment is gas tight, even showing minute leaks that will not normally show up with soapy water solutions, especially important with gases such as Hydrogen and Helium